OBDScope is a vehicle On-Board diagnostics software for S60 smartphones (3rd and 5th editions). It can be used with an ELM chip based Bluetooth OBD adapter. This is a hobby project and the software is freeware.
Features:
* Read Diagnostic Trouble Codes (DTC:s)
* Clear DTC:s and Check Engine Light
* Save diagnostic reports
* Send list of detected DTC:s via SMS
* Read live data (engine RPM, vehicle speed etc.), available in form of a gauge
* Log data to a .csv file
* Command Bluetooth OBD adapter with AT commands
Free Download
OBDScope_0.1.2_unsigned.sis (Released on May 6th 2009)
This is unsigned version. It needs to be signed before installing. Signing can be done e.g. at www.symbiansigned.com
This version expires on September 1st 2009.
Usage trics
Diagnose:
* If you get any DTC:s you can send a list of those via SMS
Gauge:
* [down]: next sensor
* [up]: previous sensor
* [c]: reset min/max
* [1]: apply Voltage/Current when reading oxygen sensor
* [2]: apply Equivalence Ratio when reading oxygen sensor
* [right soft ***]: back to list of sensors
Logging:
* currently OBDScope will log data from all available sensors
* Files are stored in c:\obdscope\datalogs or in same path on memory card
Reporting errors
In case you detect an error in the software you may help with fixing it. All improvement ideas and other comments are welcome as well. You may generate a log file with following instructions and send it to
* Create c:\logs\obdscope folder on your phone
* Run the software to get the error
* Look at c:\logs\obdscope folder, the log should be there
Features:
* Read Diagnostic Trouble Codes (DTC:s)
* Clear DTC:s and Check Engine Light
* Save diagnostic reports
* Send list of detected DTC:s via SMS
* Read live data (engine RPM, vehicle speed etc.), available in form of a gauge
* Log data to a .csv file
* Command Bluetooth OBD adapter with AT commands
Free Download
OBDScope_0.1.2_unsigned.sis (Released on May 6th 2009)
This is unsigned version. It needs to be signed before installing. Signing can be done e.g. at www.symbiansigned.com
This version expires on September 1st 2009.
Usage trics
Diagnose:
* If you get any DTC:s you can send a list of those via SMS
Gauge:
* [down]: next sensor
* [up]: previous sensor
* [c]: reset min/max
* [1]: apply Voltage/Current when reading oxygen sensor
* [2]: apply Equivalence Ratio when reading oxygen sensor
* [right soft ***]: back to list of sensors
Logging:
* currently OBDScope will log data from all available sensors
* Files are stored in c:\obdscope\datalogs or in same path on memory card
Reporting errors
In case you detect an error in the software you may help with fixing it. All improvement ideas and other comments are welcome as well. You may generate a log file with following instructions and send it to
* Create c:\logs\obdscope folder on your phone
* Run the software to get the error
* Look at c:\logs\obdscope folder, the log should be there
0 comments:
Post a Comment